Subli Glaze™ Adhesion Promoter is used with Subli Glaze™ Sublimation Coatings. It helps the coatings bond to super smooth materials such as glass, acrylic, and metal. This prevents the coating from separating from the substrate after pressing. Unlike the Sublimation Coatings, it isn't a spray-on product. It applies with a cloth or a foam brush. Adhesion Promoter comes in 250 mL plastic bottles with 20 bottles per case.

See the "Attachments" tab above to download a complete list of instructions.

Directions

1. Ensure all surfaces to be pre-treated are clean, dry, and free from dirt or grease.
2. With a soft clean cloth or foam brush. apply liberally over the surface to be coated. Ensure even coverage.
3. Allow Subli Glaze™ Adhesion Promoter to bond with the surface for approximately 30 seconds.
4. Remove any excess with a clean cloth. When removing excess, try to eliminate any grease or smudge marks, if present.