No Product Add in Cart
Banner Ups PowerTape® Single-Sided Banner Tape is designed for use with Banner Ups Tabs. Place the Banner Ups Tabs first and then apply PowerTape® over them on the back side of the banner. PowerTape® produces a strong, slim hem without any frumpy folding, bulging, or rippling. Besides creating a reinforced hem, this tape adds strength to the banner as a whole.
Application Tips
Recommended for outdoor banners more than 8 feet in length.
When used with PowerTabs®, apply tab first. PowerTabs® will not stick over PowerTape® because the tape has a silicone release coating.
Apply light tension to banner for easy application.
Position 1/8”-1/4” from top and bottom edge to allow for some tape wander.
PowerTape® may be used along sides of vertical banners to reduce edge curl.
TAPEPOWER |
Data sheet
Recom. Applications | Outdoor banners greater than 8 ft in length |
Available Lengths | 36 yd |
Available Widths (in inches) | 1.5" |
Colour(s) and Finish | Clear & white |
Specific References
Error
- Square shape for corners and edges
- Ideal for banners and posters
- Neck loop and centre hole mounts
- Clear
- Tab size: 1.5" x 1.5"
- Multi-month durability
- Simple, economical grommet alternative
- Suitable for banners, corrugated plastic, and paper
- Clear option ideal for printed banners
- Neck loop and centre hole mounts
- Tab size: 2.125" x 2.125" triangular
- Multi-month durability
- Double-sided adhesive
- Clear
- Creates fold-finish banner hem
- Ultimate tensile strength
- 1.5" x 30 yard roll
- Ideal for general signage and banner hemming
- 102 oz/in 180° peel strength
- -40° to 160°C temperature resistance
- 36yd roll
- 5 mil
- Designed for fabric hems
- Ideal for banners, fabrics, canvases, and polyesters
- More economical than sewing
- 3/8" for indoor and outdoor use
- 3/4" for heavy duty outdoor use
- 27 yard rolls
- 23 mil