AT-75 Clear Conform 48in
  • AT-75 Clear Conform 48in

RTape® AT75 Clear Choice® Textured High Tack

  • High tack
  • Zingy grid texture
  • Air egress micro channels
  • Ideal for thermal die cut or textured vinyls
  • 24" or 48" x 100 yd

To see your prices, please log in or register.

RTape® Clear Choice® AT75 Textured High Tack application tape is one of RTape®'s best known products. Its deeply embossed grid texture gives it a distinctive zingy sound in addition to air egress micro channel adhesive for bubble-free lamination. RTape® Clear Choice® AT75 is best suited to difficult-to-transfer installations such as thermal die cut graphics or highly texture matte films including etched glass and carbon fiber vinyls. Made from transparent HOPE, this clear transfer tape provides excellent visibility for precisely aligning overlapping graphics. RTape® Clear Choice® AT75 has exceptional wet application characteristics with no water whitening or adhesive residue.  In addition to being repositionable, AT75 offers easy unwinding and excellent release liner adhesion.

Application Notice: For maximum lift power on vinyls with tight release liners, apply AT75 to the graphic, wait 30 minutes for the micro channel adhesive to spread, and then lift from the liner.

Technical Data Sheet

Free slitting to custom roll widths for all application tapes!

TAPEAT75

Data sheet

Thickness 4.25 mil
Film Type Synthetic
Film Details Grid embossed
Material HOPE
Adhesive Details Repositionable | Modified polyacrylate with air egress micro channels | 8.4 N/100mm (7.5 oz) adhered to steel using PSTC-101 test method
Adhesive Strength High Tack
Recom. Applications Precise alignment and application of small to medium-size cut vinyl graphics, especially thermal cut graphics, matte finish vinyls, and/or heavily textured films.
Available Lengths 100 yd
Available Widths (in inches) 24, 48 | Free custom slitting available on all roll widths
Colour(s) and Finish Transparent | Deep grid texture
Shelf Life 1 year
Installation For highest power lift adhesion, apply tape to graphic, wait 30 minutes, and then remove graphic from release liner.
Tensile Strength 13 MPa (2000 psi)

Specific References

Related Products
  • 60" logs available here
  • Best seller
  • High tack
  • Lay flat properties
  • Ideal for small cut or printed graphics
  • Good adhesion for hard-to-lift vinyls
  • 100yd roll
  • Sold in 6" increments
Quick view
  • High tack
  • Ultra-clear for highest precision
  • Ideal for small and medium cut graphics
  • Repositionable
  • 24" or 48" x 100 yd
Quick view
  • High tack
  • Premium heavy-weight paper
  • RLA® Release Liner Adhesive
  • Ideal for small to medium cut graphics
  • 24" 30", or 48" x 100yd
Quick view
  • 54" available here
  • High tack
  • Ideal for die-cut or computer cut graphics
  • Adhesive designed for decorative matte or textured films
  • 24", 48", 54" wide logs
  • 100yd
Quick view
  • Low tack
  • Ultra-clear for highest precision
  • Ideal for large cut graphics and prints
  • Repositionable
  • 24" or 48" x 100 yd
Quick view