AP3155 UV Adhesion Promoter for Hard to Print Substrates
  • AP3155 UV Adhesion Promoter for Hard to Print Substrates

AP3155 UV Adhesion Promoter for Hard to Print Substrates

  • Ink adhesion promoter
  • For glass, metal, aluminum, acrylics
  • Interior and exterior applications
  • For use with UV and LED curable inks
  • 1 L

To see your prices, please log in or register.

AP3155 is an adhesion promoter for use with UV and LED curable inks when printing on hard-to-print substrates including glass, metal, aluminum, and acrylics. This product is also suitable for use on HDPE, Coroplast, and polystyrene.

 

Application Instructions

  1. Wear protective gear including latex or nitrile gloves and safety glasses
  2. Use in a well ventilated area
  3. Apply AP3155 to the substrate with a clean, white, lint free wipe or microfiber cloth saturated with the promoter, covering the full surface and ensuring no voids
  4. Using a clean, dry, white lint free wipe or microfiber cloth, wipe off AP3155, leaving a thin layer of promoter on the substrate (the substrate will feel slippery)
  5. Load the AP3155 prepared substrate into the printer and print image using UV or LED curable ink
  6. AP3155 will cure with the ink when flashed by the UV or LED lamp

 

Special Instructions for Glass

  1. When printing on glass only print on the float or tin side of the glass
  2. To confirm the float or tin side, illuminate the glass with a black light: the float or tin side of the glass will glow
ADHPROUV-AP3155L

Specific References

Related Products
  • Ink adhesion promoter
  • For Coroplast, polystyrene PVC, HDPE
  • For use with UV and LED curable inks
  • 1 L
Quick view