Note: This product is special order only. Call or email if no stock is available.

AP3155 is an adhesion promoter for use with UV and LED curable inks when printing on hard-to-print substrates including glass, metal, aluminum, and acrylics. This product is also suitable for use on HDPE, Coroplast, and polystyrene.

Application Instructions

1. Wear protective gear including latex or nitrile gloves and safety glasses
2. Use in a well ventilated area
3. Apply AP3155 to the substrate with a clean, white, lint free wipe or microfiber cloth saturated with the promoter, covering the full surface and ensuring no voids
4. Using a clean, dry, white lint free wipe or microfiber cloth, wipe off AP3155, leaving a thin layer of promoter on the substrate (the substrate will feel slippery)
5. Load the AP3155 prepared substrate into the printer and print image using UV or LED curable ink
6. AP3155 will cure with the ink when flashed by the UV or LED lamp

Special Instructions for Glass

1. When printing on glass only print on the float or tin side of the glass
2. To confirm the float or tin side, illuminate the glass with a black light: the float or tin side of the glass will glow