- On sale!
- -31.8%
No Product Add in Cart
Subli Glaze™ Sublimation Coatings transform hard objects into dye sub surfaces. It's a simple spray-and-bake, do-it-yourself process. This product creates a thin polymer layer to which sublimation inks can bond. Without this polymer layer, images won't transfer.
Subli Glaze™ is suitable for ceramics, glass, wood, slate, metal. It's available in multiple finishes and opacities: clear gloss, clear matte, opaque white, and translucent white. Some surfaces require two kinds of spray, as well as adhesion promoter. Keep reading for coating combinations and material recommendations. This product comes in 13.5 oz (400 mL) aerosol cans with 12 cans per case. One aerosol can covers approximately 20 sqft (2 m²), although your results may vary.
See the "Attachments" tab above to download a complete list of instructions.
Material | Desired Background |
Needs Adhesion Promoter |
First Coat | Second Coat |
---|---|---|---|---|
Acrylic* | Acrylic | Yes | Clear or Matte | - |
Acrylic (Transparent)* | Translucent White | Yes | Clear | White Translucent |
Acrylic (Opaque)* | Opaque White | Yes | White Opaque | Clear or Matte |
Ceramic | Ceramic | No | Clear or Matte | - |
Ceramic | White | Yes | White Opaque | Clear or Matte |
Glass | Glass | Yes | Clear or Matte | - |
Glass | Translucent White | Yes | Clear | White Translucent |
Glass (Opaque) | Opaque White | Yes | White Opaque | Clear or Matte |
Metal | Metal | Yes | Clear or Matte | - |
Metal | White | Yes | White Opaque | Clear or Matte |
Slate | Slate (not recommended) | No | Clear or Matte | - |
Slate | White | Yes | White Opaque | Clear or Matte |
Wood | Wood | No | Clear or Matte | - |
Wood | White | Yes | White Opaque | Clear or Matte |
* Note about acrylic. Certain acrylic is heat sensitive. It may not withstand the curing heat or the heat and pressure during the sublimation process. Be aware and careful. Test first.
Subli Glaze™ Clear and Matte
Clear (gloss) has a blue cap. (Clear) Matte has a navy cap. Use by itself on white or light-coloured ceramic. Use in combination with adhesion promoter and/or with white sprays for different materials.
Directions
- Ensure the surface to be coated is clean, dry, and free from grease.
- Shake the can well for 1 minute.
- Apply Subli Glaze™ coating smoothly and evenly, holding the can approximately 12 inches (30 cm) from surface using light passes at room temperature.
- Use multiple passes for a higher gloss finish (Clear) or higher matte finish (Matte) but do not allow the spray to pool on the surface.
- Allow to air dry for 10 minutes then cure in an oven at 320°F (160°C) for 15-20 minutes.
Subli Glaze™ White Opaque
White Opaque has a red cap. Use it to create a white background. It's particularly useful for black dark-coloured, or opaque materials. Sublimation ink will be very dark and nearly impossible to see if applied on top of dark colours. It's suitable for all hard materials including metal, opaque acrylic, slate, ceramic, wood, and opaque glass. It requires adhesion promoter and Subli Glaze™ Clear or Matte.
Directions
- Ensure the surface to be coated is clean, dry, and free from grease.
- Prime the surface with adhesion promoter.
- Shake the can well for 1 minute.
- Apply a fine coating of White Opaque and allow to air dry for 5 minutes.
- Apply on top a fine coating of Subli Glaze™ Clear or Matte and allow to air dry for 5 minutes.
- Cure in an oven at 320°F (160°C) for 15-20 minutes.
Subli Glaze™ White Translucent
White Translucent has a green cap. It is designed for clear materials such as glass and acrylic. The translucence creates a white background but still allows some light to pass through. This spray applies to the backside of the material. When the image is applied, the sublimation ink passes through the white layer and the image is visible on the other side of the clear material, the uncoated side. This coating requires adhesion promoter and Subli Glaze™ Clear.
Directions
- Ensure the surface to be coated is clean, dry, and free from grease.
- Prime the surface with adhesion promoter.
- Shake the can well for 1 minute.
- Coat glass first with Subli Glaze™ Clear and allow to air dry for 5 minutes.
- Apply a fine coating of White Translucent over the clear and allow to air dry for 5 minutes.
- Cure in an oven at 320°F (160°C) for 15-20 minutes.
Subli Glaze™ UV Protection
UV Protection has an orange cap. It isn't a sublimation coating at all. It protects sublimated images from UV fading, keeping the colours vivid. Is your finished product going outside or near a window? Consider adding UV protection. This product sprays on after the image has been applied.
Directions
- Ensure the surface to be coated is clean, dry, and free from grease.
- Shake the can well for 1 minute.
- Apply Subli Glaze™ UV Protection coating smoothly and evenly, holding the can approximately 10" (25cm) from surface using light passes at room temperature.
- Air dry for 24 hours. The substrate is touch dry in approximately 1 hour and fully cured in 24 hours.
SUBLIGLAZE-WHTOPAQ |
Specific References
Download
Subli Glaze - Instructions
Subli Glaze - Instructions_en
Download (446.34KB)Error
- Ideal for fabrics
- With tack
- 4 mil
- 85 g/m²
- 44" x 328ft rolls, sold in 82ft increments
- For hard or soft substrates
- 5.5 mil
- 120 g/m²
- Sold in 100 sheet increments
- Ideal for crafting/retail market
- -C$0.05
- Draw your own sublimation designs
- 3 colour combinations
- 6 markers per pack
- -C$6.47