No Product Add in Cart
NEW! A matte finish is now available on 54" wide material.
Orajet® 3551RA High Performance Calendered Digital Media with RapidAir® Technology is a long-term inkjet printable vinyl capable of entry-level vehicle wraps and graphics. Its ultra-calendered construction gives it moderate conformability. Orajet® 3551RA is ideal for printed wraps on flat-surface vehicles such as buses, trucks, trailers, and utility vans. It can also be used for partial wraps on smaller vehicles as well as contour cut graphics. Besides vehicle use, its longevity makes it a good choice for long-term outdoor signage.
The RapidAir® micro-channel liner allows air to escape more easily during installation. This reduces the incidence of bubbles, wrinkles, and expletives. A mildly repositionable adhesive helps reduce wrinkles and increase positioning precision. With heat and proper methods, this film is removable for up to four years after installation with minimal residue.
OJ-3551RA-101-30 |
Data sheet
Outdoor Durability | 7 years |
Thickness | 2.75 mil |
Film Type | PSA Vinyl |
Material | Calendered PVC |
Colour | White |
Finish | Gloss |
Finish | Matte |
Adhesive Details | Solvent-based | Repositionable | 4 year removability with heat and proper methods |
Adhesive Removability | Permanent w/ Removability |
Adhesive Colour | Grey |
Release Liner | 88# PE-coated silicone paper featuring advanced air release technology to facilitate quicker, easier application |
Recom. Applications | Medium- to long-term outdoor general signage and vehicle graphics with moderate curves |
Available Widths (in inches) | 30", 50", 54", 60" |
Print Compatibility | Latex, Solvent, Eco-Solvent, UV Curable |
Conformability | Moderate curves |
Air Egress | Yes |
Recommended Laminate | Oraguard® 215, 290, 290GF, 293, 297GF |
Specific References
Error
- Simple to moderate vehicle graphics
- Moderate conformability
- Repositionable adhesive
- 7 year durability
- 2.75 mil
- Long term removability
- Easy Applyᵀᴹ air egress
- 6 year durability
- 3.1 mil
- Not in stock. Please call to place a backorder.
Please choose the number of cuts you would like to request.
Keep in mind that if you want a 24" roll to be cut into 3 equal sizes, for example, the quantity of cuts will be 2.
Follow these steps:
- In the Product Customization section below, specify the rolls you want cut and the cut sizes.
- Click Save.
- Then click Add to Cart.
Rolls with custom cutting are non-returnable and non-refundable. This price does not apply to banner material and magnetic vinyl. Use the Custom Banner Cutting page or Custom Cutting for Magnetic Vinyl page, respectively.
- Jack of all trades
- Highly discounted
- Ideal for simple or partial vehicle wraps
- Wrap bundle consists of two rolls:
- Orajet® 3551RA G/M 54" x 50 yd
- Oraguard® 215G/M/SG 54" x 50 yd
- Moderate conformability
- ProSlide low initial tack adhesive
- Ideal for printed vehicle graphics and partial wraps
- Up to 7 year outdoor durability
- 2.75 mil