• New
Avery® SF Clear 12 Mil i Interior Safety Window Film
  • Avery® SF Clear 12 Mil i Interior Safety Window Film

Avery® SF Clear 12 Mil i Interior Safety Window Film

C$30.20 Save C$0.00
Please log in or register to see your discounted prices.
  • 336 lb/in break strength
  • Reduces shattering
  • 12 mil thick
  • Full roll is 65ft

Volume discounts

Quantity Unit discount You Save
5 C$0.00 Up to C$0.00
65 C$12.16 Up to C$790.40
130 C$12.80 Up to C$1,664.00
390 C$13.44 Up to C$5,241.60
975 C$13.73 Up to C$13,386.75

The minimum purchase order quantity for the product is 5.

In Stock

Avery Dennison® SF Clear 12 Mil i is a glass security film. It increases both the safety and security of exterior windows. Safety-wise, it reduces the chance of flying glass during an impact. This anti-shatter property protects against storm damage and debris. Security-wise, this film improves shatter-resistance and makes entry more difficult. It may delay and deter break-ins. This protective glass film is commonly used to meet building codes or insurance requirements.

This film applies to the inside of building windows.

SF Clear 12 Mil i meets the following specifications:

  • EN 356 P4A
  • DIN 52290 Part 4, A1
  • ASTM E330 Structural Performance of Exterior Windows
  • Siach Gefen IDF Testing
  • Bomb Blast GSA Level D
  • UL 972 Burglary Resisting Glazing Material (3A) x2 + No Bar on Both Sides.

Mechanical Properties

Thickness 12 mil
Tensile Strength at Break 28,500 PSI
Break Strength 336 lb/inch
Elongation at Break 125%
Peel Strength 7 lb/inch

Optical & Solar Properties

Visible Light Transmitted 87%
Visible Light Reflected (Interior) 11%
Visible Light Reflected (Exterior) 11%
Ultraviolet Block 99%
Total Solar Energy Reflected 10%
Total Solar Energy Transmitted 78%
Total Solar Energy Absorbed 12%
Glare Reduction 3%
Shading Coefficient 0.94
Solar Heat Gain Coeff. (G-Value) 0.82
U-Value Winter (IP) 1.07
U-Value Winter (SI) 6.07
Total Solar Energy Rejected 18%


Data sheet

Thickness 12 mil
Film Type Window Film / Tint
Material PET (polyethylene terephthalate)
Adhesive Details Pressure sensitive
Adhesive Colour Clear
Release Liner Siliconized PET
Available Lengths Full roll is 65ft
Available Widths (in inches) 48, 60, 72

Specific References

Related Products
  • Guards against permanent graffiti
  • Ink and paint wipe off
  • Resistant to UV rays, salt spray, dirt, humidity, and abrasion
  • 1 mil polyester
  • 3 year durability
Quick view
  • Protects against permanent graffiti
  • Inks and paints wipe off
  • Highly flexible
  • Water-based
  • Remember to buy both Part A & Part B (in drop down menu)
Quick view