Oralite® 5600RA Fleet Engineering Grade Film with RapidAir® technology is a high quality, semi-conformable reflective vinyl. This product is an upgrade over the similar-sounding Oralite® 5650RA. It offers a new, repositionable adhesive with low initial tack. This allows installers to easily move the material up and down and side to side before anchoring it. Additionally, with a bit of heat, it can be cleanly removed for up to 4 years after installation. Both of these features make it more wrap-friendly.
Oralite® 5600RA reflective is ideal for long-term vehicle wraps including applications on emergency vehicles, tow trucks, security fleets, utility trucks, and snow removal equipment. RapidAir® micro channels makes for easier installation by reducing the likelihood of bubbles and wrinkles. This flexible film conforms over rivets and moderate curves. It provides good reflectivity even in low visibility conditions. Like all the other products in the 5600 series, this glass bead reflective vinyl is solvent printable.
This product's adhesive has low initial tack. That makes it easy to move and position on the substrate. But it also requires enough pressure to adhere at the beginning. When squeegeeing, make sure to use overlapping strokes and even pressure across the whole graphic. Light pressure and/or squeegeeing gaps can make the vinyl lift after application. Heating the entire surface after installation will highlight any missed spots or untacked places.
|Outdoor Durability||7 years|
|Film Type||Glass Bead Reflective|
|Adhesive Details||Solvent-based | Repositionable, low initial tack | Removable with heat|
|Adhesive Removability||Permanent w/ Removability|
|Release Liner||89# PE-coated silicone paper featuring advanced air release technology to facilitate quicker, easier application|
|Recom. Applications||Easily applied long-term fleet graphics applications such as reflective lettering, markings, and decorations|
|Available Widths (in inches)||24, 48, 54|
|Colour(s) and Finish||White retroreflective|
|Certifications||Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting|
|Print Compatibility||(White Only) Latex, Solvent, Eco-Solvent, UV Curable & Screen Printing|
|ASTM D 4956||Type I|
- Moderately conformable - templating recommended
- Repositionable adhesive
- Ideal for emergency vehicles
- 8 colours
- 5 year durability
Please choose the number of cuts you would like to request.
Keep in mind that if you want a 24" roll to be cut into 3 equal sizes, for example, the quantity of cuts will be 2.
Follow these steps:
- In the Product Customization section below, specify the rolls you want cut and the cut sizes.
- Click Save.
- Then click Add to Cart.
Rolls with custom cutting are non-returnable and non-refundable.